{"id":2532,"date":"2019-11-07T16:24:33","date_gmt":"2019-11-07T16:24:33","guid":{"rendered":"http:\/\/myasa.mx\/analytical-catalogue\/"},"modified":"2019-11-19T04:38:13","modified_gmt":"2019-11-19T04:38:13","slug":"analytical-catalogue","status":"publish","type":"page","link":"https:\/\/myasa.mx\/en\/analytical-catalogue\/","title":{"rendered":"Analytical Catalogue"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Logo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Continuous analizers for process gas. EXTRACTIVE AND IN SITU.<\/i><\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

ULTRAMAT 23<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Analizador\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u00a0<\/p>

Multi-component design and NDIR technology for measurement of up to three active IR gases and optional electrochemical and paramagnetic cells for measuring O2.<\/p>

The automatic integrated calibration function that makes use of ambient air is a unique advantage. In addition, calibration with standard gas is necessary only once a year.<\/p>

High reliability and maximum response speed in conjunction with multilayer detectors guarantee high selectivity and zero interference.<\/p>

Maximum number of components: 3 IR + O2.
Components: example CO, CO2, NO, SO2, CH4, O2, H2S
Minimum measurement range:
Specific for each component: 0-50 \/ 0-500 vpm.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

Combines the productivity and reliability of gas measurements of a ULTRAMAT 6 with OXYMAT 6 in a single analyzer, guaranteed by modern electronics, high selectivity and operation ease.<\/p>\n

Up to two active infrared components and oxygen can be measured even in complex gas mixtures, guaranteeing measurements of lower concentrations and detection limits. <\/p>\n

Maximum number of components: 2 IR + O2
\nComponents: O2 and active components in the IR.
\nMinimum measuring range: 0-0.5% O2 and depending on the IR component: 0-5 \/ 0-100 ppm<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

ULTRAMAT \/ OXIMAT 6<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Analizador\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

CALOMAT<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Analizador\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

For the continuous measurement of noble gases and hydrogen, the thermal conductivity of the gas sample mixture is measured and used to calculate the concentration. If more than two components are present, the concentration of others must be measured separately using other methods, but CALOMAT 6 can perform the internal correction of these and truly show the concentration of gas in its process.<\/p>\n

Maximum number of components: 1.
\nComponents: example H2, He
\nMinimum measuring range: 0-1%. <\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

Gas analyzers with an FID (Flame Ionization Detector) are ideal for measuring total hydrocarbon.<\/p>\n

FIDAMAT versions cover a wide range of uses even with the presence of corrosive fumes. Maximum number of components: 1.<\/p>\n

Maximum number of components: 1.

\nComponents: Total hydrocarbons.

\nMinimum measurement range: 0-10 vpm.
\n<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

FIDAMAT<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Analizador\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

SITRANS SL<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

A gas analyzer with diode laser that works according to the NDIR principle. SITRANS is especially suitable for quick and contactless measuring concentrations of chimney or process gases. Two sensors (one sending and one receiving unit) are mounted directly in the process. For this, no sample extraction and treatment systems are needed. The sensors are designed to operate under adverse environmental conditions.<\/p>\n

This measurement principle works almost in real time, with total precision and with hardly any disturbances caused by secondary gases, dust or aerosols. Other influences, for example variations in pressure or temperature are compensated by the device.<\/p>\n

Maximum number of components: 1.
\nComponents: O2.
\nMinimum measuring range: O2: 0-1%.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

\u00a0<\/p>

LDS 6 does not contain parts subject to wear. Its design opens new possibilities for process control and emission monitoring. The simple fact that with LDS 6 it is possible to generate process data without contact and in real time, without distortion or delay.<\/p>

In addition, the rapid in situ<\/i> measurement can have a positive impact on the profitability and environmental compatibility of the plant.<\/p>

Maximum number of components: 2.
Components: O2, NH3, HF, H2O, CO2, CO, HCl
Minimum measurement range: Specific for each component from 0-5 ppm to 0-5%.<\/p>

\u00a0<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

LDS 6<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

SIPROCESS GA700<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Analizador\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

\nThe new SIPROCESS GA700 series for gas analysis offers the possibility of accommodating two modules in a housing: either in a wall mounting box or in a 19 \u2033 rack box with three height units, depending on the needs.<\/p>\n

SIPROCESS GA700-ULTRAMAT 7
\nhigh measurement accuracy for complex gas mixtures according to the NDIR principle.<\/p>\n

SIPROCESS GA700 – OXYMAT 7
\nfor measuring oxygen concentrations.
\nMaximum measurement accuracy thanks to the paramagnetic method.<\/p>\n

SIPROCESS GA 700 – CALOMAT 7
\nfor the quantitative determination of H2 and He in binary gas mixtures and the like with thermal conductivity detector.<\/p>\n

<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tContact<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"duraggroup_logo\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Emissions measurement and monitoring: Dust, Flow, Mercury, CEMS.<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

D-R 320 DUST MONITOR<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

D-R 320 is based on the principle of backward scattered light. In this way, the light of a red laser diode illuminates dust particles in the measurement volume of the combustion gas duct. The light scattered backwards by these particles is detected and evaluated.<\/p>\n

\nA unique feature of the D-R 320 is the automatic backlight compensation with a patented dual detector optical system. This allows quick and easy installation without any adjustment. A light trap is not required.<\/p>\n

Measuring range: 0\u2026 5 mg \/ m\u00b3 max. 0\u2026 200 mg \/ m\u00b3. Concentration: 0\u2026 7.5 mg \/ m\u00b3.
\nConcentration: 0\u2026 7.5 mg \/ m\u00b3.
\nIP protection class: (IEC 60529) IP65.<\/p>\n

<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

D-R 808 is a scattered light dust monitor, tested to monitor small to medium dust concentrations in dry fumes or process gases.<\/p>\n

For the monitoring of very low concentrations, the principle of forward dispersion is ideal. Here, the modulated light of a laser diode penetrates the measurement volume in the smoke duct. A highly sensitive detector records the light scattered by dust particles in a forward direction. The measured scattered light is directly proportional to the dust concentration.<\/p>\n

Measuring range: Min.: 0\u2026 5 mg \/ m3 Max.: 0\u2026 200 mg \/ m3.
\nLowest certified range: 0\u2026 7.5 mg \/ m3.
\nMeasuring principle: forward dispersion.
\nIP protection class: (IEC 60529) IP65.<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

D-R 808 DUST MONITOR<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

D-R 290 OPACITY MONITOR<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

D-R 290 works using the double-pass method according to the principle of self-polymerization. The light beam crosses the measurement path twice. The attenuation of the light beam is measured and evaluated by the dust content in the measurement section.<\/p>\n

D-R 290 has an internal reference point and zero verification, as well as pollution measurement. The pollution is compensated automatically. A maintenance demand is indicated immediately.<\/p>\n

Measuring range:
\nExtinction: 0\u2026 2.0.
\nOpacity: 0…100 %
\nDust: 0…80 mg\/m3… 0… 5000 mg\/m3<\/p>\n

Measurements: Extinction, transmission, opacity, dust concentration.
\nIP protection class: (IEC 60529) IP65.<\/p>\n

<\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

Total mercury analyzer certified for the continuous measurement of mercury in chimney or process gases that allows the speciation of elemental and oxidized mercury.<\/p>\n

With the lowest measuring range newly certified. For EN 15267 of 0\u2026 15 \u00b5g \/ m\u00b3 for large combustion plants.<\/p>\n

Elementary and rusty.
\nAutomatic verification of the reference point with internal HgCl2 calibration gas generator.
\nWithout extremely hot components, easy to maintain.<\/p>\n

Automatic leak control.
\nAutomatic zero point check with ambient air.
\nAutomatic verification of the reference point with HgCl2 calibration gas generated with internal reference gas generator.<\/p>\n

Manual verification of the reference point with external calibration gas generator.<\/p>\n

Measuring range: Total Hg 0\u2026 400 \u03bcg \/ m3.
\nMeasurements: total mercury concentration Hg total after calibration with the standard reference method.
\nIP protection class: (IEC 60529) IP54.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

HM-1400 TRX 2\nHM-1400 TRX 2 TOTAL MERCURY ANALYZER<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

D-FL 220\nFLOW MEASUREMENT<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t<\/p>\n

Ultrasonic measuring system tested and certified to measure the speed and volume flow of combustion gases or process gases in pipes or ducts, especially for wet and aggressive smoke emissions.<\/p>\n

D-FL 220 measurement system operates according to the acoustic transit time difference method. Two identical transducers are sent to each other and receive short ultrasonic pulses. The system calculates the precise speed of the gas from the difference in transit time dependent on the direction. The speed of the respective volume flow of the waste gas is accurately calculated from the difference in transit time that depends on the direction.<\/p>\n

Measuring range: 0\u2026 3000000 m3 \/ h \/ 0\u2026 40 m \/ s.<\/p>\n

Measurements: Gas speed and direction, volumetric flow under normal conditions or operating conditions.
IP protection class: (IEC 60529) IP55.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

Hamburg \/ Aix-en-Provence, January 28, 2019 – The company AP2E, member of the DURAG GROUP, successfully obtained the QAL1 certificate for the ProCeas\u00ae LaserCEM\u00ae gas analysis system according to MCERTS. Therefore, the measuring instruments meet the high quality requirements of European standards EN 14181 and EN 15267.<\/p>\n

AP2E gas analysis systems are used successfully worldwide for continuous emission monitoring. AP2E solutions are based on an innovative laser gas technology and a sampling system, both patented. This allows the analysis of complex and simple gas mixtures, while maintaining high selectivity, precision and stability over a wide measuring range.<\/p>\n

Measuring gases: H2S, CH4, CO, CO2, H2, H2O, HCI, HCN, HF, N2O, NH3, O2, NO, NO2.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

AP2E\nGAS ANALYZER<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tContact<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"enotec_logo\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

CEMTEC \/ OXITEC emission control and process gas analyzers<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

CEMTEC<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Equipo\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

<\/p>\n

CEMTEC\u00ae is a probe that can self-clean and allows a virtually continuous measurement with 95% availability. In addition to the sensors for a direct and instantaneous analysis of oxygen and COe, a gas conduction line provided with heating, allows approximately 60 l \/ h of combustion gas to be supplied to an extraction analyzer with which to measure various components such as O2, NOx or CO2.<\/p>\n

Applications:<\/p>\n